Hallo zusammen,
ich habe eine Frage :
Ich möchte gern meine XBox an meinen frisch erworbenen Automaten anschließen. Nun favorisiere ich das Set von ultimarc.com
Beschreibung :
[http://www.ultimarc.com/images/xbox-ipac.jpg]
X-Box to Arcade Monitor/Speaker Adaptor
This cable plugs into the X-Box AV port. It includes a video amplifier which boosts the X-Box video signal to the level required by arcade monitors. It also includes a sync separator chip (inside the D-Plug housing). You can also plug in a pair of amplified speakers for sound. The picture shows all connections required for an X-Box to arcade monitor, speakers and controls.
IMPORTANT! This cable only works with 15Khz arcade monitors. It will NOT work with PC monitors. If your arcade monitor is a multi-frequency model (eg W-G D9500) and has a VGA connector then the J-PAC adaptor (below) is the best choice.
Nun hat mein VirtuaFighter Kasten aber einen 26" Moni mit folgenden Specs:
MEDIUM RESOLUTION
HORIZONTAL VERTICAL
Scan Frequency: 25.00 KHz Scan Frequency: 60.0 Hz
Scan Period: 40.0 µSec Scan Period: 16.7 mSec
Active Video: 32.0 µSec Active Video: 15.4 mSec
Video Delay: 7.2 µSec Video Delay: 1.2 mSec
Sync Pulse: 4.0 µSec Sync Pulse: 0.2 mSec
Scan Line: 640 Pixels Screen: 416 Lines
Resolution: 512 Pixels Resolution: 384 Lines
Clock Freq: 16.00 MHz
Bekomme ich problem mit dem Videosignal ?! Da von 15KHz die Rede is, jedoch mein Monitor mit 25 arbeitet ?!
Gruß,
Elmar
Zitieren
Zitat von hELLrIPPER
