Hello Arcade Professors,
Sorry for doing this in English but my German is not that good
I have a problem please help me if you can.
I bought an revenge from Mars pinball with a non working monitor.
I didn't know if it was the pc or the monitor so I hooked it up an other monitor to see what would happen.
I got a picture so I think the pc is oké.
Problem is the picture is not correct. It's like the picture won't get to the middle and the writing is double. Tried to get a good picture by using the monitor adjustment buttons but that won't solve it, believe me I tried :/ .
Picture of the connectors:
Left the original pinball 2000 cable/plug right the "new" tatung monitor cable/plug from a magatouch xl.
Original plug: pin1: orange pin2: beige. Pin3: back and yellow. Pin 4: black pin5,6 empty. Pin7 pink Pin8 black pin9 green. Pin10 brown.
New plug: pin1 yellow. Pin2 white. Pin3 black. Pin4 black. Pin5 blue. Pin6 black. Pin7 white. Pin8 black. Pin9 pink.
I tried to connect the pinball 2000 plug to the new cable and swapped some cables around but nothing seem to work.Maybe it just not working with this monitor but since it looks so close I'm hoping its some kind of sync problem.
Please help me, I tried to look up the answer on the net but that kind of drove me crazy.
Thanks in advance.
Greetings, Arlon Weijer.
The Netherlands.