Ergebnis 1 bis 1 von 1

Thema: RGB via SCART

  1. #1
    H@ckse Avatar von SailorSat
    Registriert seit
    26.08.2004
    Ort
    Hanau (Hessen)
    Beiträge
    2.052

    Post RGB via SCART

    • Introduction
      If you wish to connect a RGB-SCART unit, let it be a TV, Beamer or for example an old Amiga monitor, you can build a simple cable.


    • Where to get a cable
      If you don't want to build a cable yourself, or you don't have any soldering skills, you can buy prebuilt cables at www.wolfsoft.de.

      Please note! There are many SCART-to-VGA cables available on the net, which have a different Pinout.


    • Pinout
      The most simple pinout would be this one.

      Code:
      VGA             SCART   NAME
       1  -----------  15     Red Signal
       6  -----------  13     Red Ground
      
       2  -----------  11     Green Signal
       7  -----------   9     Green Ground
      
       3  -----------   7     Blue Signal
       8  -----------   5     Blue Ground
      
       9  --100-Ohm--  16     Blanking = RGB-Select (+5V -> 3V)
       5  -----------  18     Blanking Ground
      
      **  -----------   8     AV-Select -- +5V = 16/9, +12V = 4/3
      
      13  --1000-Ohm-  20     Sync Signal (H-Sync*)
      14  --1000-Ohm-  20     Sync Signal (V-Sync*)
      10  -----------  17     Sync Ground
      
      * neg. H-Sync + neg. V-Sync = neg C-Sync

    • Pictures




    Geändert von SailorSat (09-12-2011 um 06:14 Uhr)
    Ich mach das alles auch ohne Joystick ,)

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •