hab mir ne MSI bestellt, hat die komplett idente Bauform und Farbe :D Werd mal das Bios meiner AVGA auslesen und dann ein wenig "Flashen".....die Dinger kosten im EK eh nur noch 18€ :D
Druckbare Version
hab mir ne MSI bestellt, hat die komplett idente Bauform und Farbe :D Werd mal das Bios meiner AVGA auslesen und dann ein wenig "Flashen".....die Dinger kosten im EK eh nur noch 18€ :D
dann mal viel erfolg !
ps : die farbe der platine ist der springende punkt
Zitat:
Zitat von apfelanni
Kurzer Satz mit viel Zynismus und Sarkasmus.....so mag ichs, aber was genau willst damit sagen? :confused:
Drum lacht der smily hinter dem Wort Farbe im obrigen Post ;) :rolleyes:
evtl. unter dem AVGA aufkleber . . . . . . .
btw. ausgelesene BIOSe gibts schon
Und es soll sogar eines im Umlauf sein, daß bootfähig ist.
Wenn Jasons Karte noch laufen würde, hätte ich es auch mal ausprobiert :p :D
Mal was ausm Arcadecontrolls-Forum von Andy Warne
Quelle : http://forum.arcadecontrols.com/inde...3146.msg285405Zitat:
.......
The card hardware is different. The PLL clock on VGA cards is designed to deal with resolutions up to 1280 and beyond, not down to 240 at 15Khz. The clock generation does not work properly at the low frequencies necessary as anyone who has tried to use Powerstrip to create a low resolution at 15Khz will have found out. Zum Thema gleiche Hardware
The BIOS is a complete re-write and this represents 6 months of intensive work during which time I nearly gave up many times. It is not just a matter of changing some tables, there is a completely new section of code for example which calculates the pixel clock based on a fixed 15Khz scan rate and enables interlacing if required.
The other point is that the BIOS does not stay static. For example ATI recently replaced the R9200 with R9250. Although this is pin-compatible with the 9200 the BIOS requirements are different, which required me to lock myself in my workshop for 2 weeks. Also using different RAM chips on the board needs a BIOS change.
.......
Andy
And thats why i only use the original AVGA. :eek: ;)
Zum einen, du musst die PCI Karte unter Windows DEAKTIVIEREN, nicht DEINSTALLIEREN.
Zum anderen...
JEDE Radeon 9200SE mit 128MB kann man mit dem AVGA Bios der 9200er AVGA flashen, egal ob AGP oder PCI.
Nur die Sache mit dem Booten funktioniert nur bedingt. Ich hab über 20 Karten so umgeflashed und davon konnte ich nur 3 nicht direkt booten.
Dann erzähl doch mal welche boiotbar waren und welche nicht.
Öh... Frag mich mal wenn ich die Pappkartons finde...
Habe generell nur Club3D und Sapphire Karten benutzt
Sapphire Atlantis 9200se waren die PCI Karten und
Club3D Radeon9200se waren die AGP Karten
Davon waren wie schon gesagt 3 Karten nicht bootfähig, der Rest schon.
Habe mich aber schon eine Weile nicht damit beschäftigt, zumal ich keine 9200SE mehr bekommen habe da diese durch die 9250SE ersetzt wurden.