Liste der Anhänge anzeigen (Anzahl: 4)
Eigenbau Automat von RobMexx (Achtung Modemuser große Bilder)
Hallo Forum,
ich will mich schnell vorstellen, dann geht es auch schon los.
Ich heisse Robert (27), komme aus Bremen und bin leidenschaftlicher "Gamer".
Angefangen hat alles beim Atari 2600 vor ca 20 Jahren.
Weiter ging es über C64=, Gameboy, SNES bis hin zu den neuen Konsolen.
Mit dem Thema Emulation beschäftige ich mich seit ca. 3 Jahren. Damals noch mit NeoRageX. Bin dann nach PC neuinstallation beim Favouriten ausmisten wieder darauf aufmerksam geworden. Hab mich dann mit Mame auseinandergesetzt (mehr kompabilität etc.) und bin dadurch hier gelandet.
Und ich muss sagen, tolle Comunity (jedenfalls so vom mitlesesn).
Endlich mal normale Leute! :D
Jetzt zum Kern:
Drei Wochen Urlaub und intensive Internetrecherche(?) haben mich animiert selber Hand anzulegen und heraus kam bis jetzt Folgendes:
http://www.nrg.to/RobMexx/Photo-0064.JPG
http://www.nrg.to/RobMexx/Photo-0064.jpgZwei 19er MDF Platten zurechtgeschnitten
http://www.nrg.to/RobMexx/Photo-0068.JPG
http://www.nrg.to/RobMexx/Photo-0068.jpgSeitenteile Lackiert und mit Stosskanten zum verschrauben der Wände versehen, damit ich keine Schraubenköpfe sehen kann.
http://www.nrg.to/RobMexx/Photo-0069.JPG
http://www.nrg.to/RobMexx/Photo-0069.jpgDas fertige Grundgesrüst nach ca. 2 Wochen Planung und 3 vollen Tagen Bau.
http://www.nrg.to/RobMexx/Photo-0070.JPG
http://www.nrg.to/RobMexx/Photo-0070.jpgAm Darauf folgendem Tag provisorisch eingerichtet.
Der Urlaub ist leider um, und das ist der jetzige Stand. Der Vorbau soll später das CP werden. Der Arcade Controller ist nur eine Übergangslösung aus Altbeständen.
Eine Fronttür ist schon gesägt und lackiert, allerding fehlt mir noch ein Münzprüfer. Bezel fällt weg, ich werde warscheinlich ein komplett abgetöntes Plexiglas verwenden, sodaß man eh nicht ins Cabinet blicken kann.
Danach folgt die Komplettierung der Technik, sprich vertigstellung des CP, umschaltbares CP auf die jeweilig aktive Konsole/ PC, Münzprüfer etc...
Marqee und T-Molding sind dann der letzte Schritt, ich halte euch auf dem laufendem.
Freue mich jetzt schon auf lange Winterabende und Eure Community,
Robbie
[EDIT] Jetzt aber, oder?
Liste der Anhänge anzeigen (Anzahl: 5)
Zitat:
Zitat von KoolKolo
Geht ja richtig los mit deiner Maschine.
Darf ich fragen, was Du alles auf in Dein doch recht riesiges CP reinbauen willst.
Ich mag ja diese großen Panels, wo alles drauf ist und man alles beqeuem bedienen kann.
-> Da hilft natürlich die große Fläche... :cool:
Zeig mal Bilder von der eingebauten Plexiglasschiebe.
Hast Du mal geguckt, ob Lightguns noch funktionieren oder hast Du für PS2 und DC keine LG?
Gruß Kai
Also auf das CP sollen 2 Spieler a 2 Sticks jeweils 7 Buttons (also14), 2x Start, ein Trackball mit 2 Tasten, evtl ein Paddel bzw Spinner (so´n Atari Pong Controller halt), 4 Systemtasten.
Ausserdem ist im CP selber mein Stauraum für Konsolen Gamepads, Lightgun etc etc.
Thema Lightgun:
Habe heute die Guncon1 und den Segablaster getestet. Lief alles 100%.
Hab mit Point Blank, Time Crisis (jp), und HotD2 getestet.
Werd evtl. nochmal meinen grünen Konamiblaster und Area51 rauskramen.
Aber da die anderen beiden funzen sollte es eigentlich gehen...
Hier die Bilder... (mit Plexiglas)
http://www.nrg.to/RobMexx/Photo-0069a.jpg
Einschiessen der gunCon
http://www.nrg.to/RobMexx/Photo-0070a.jpg
Ja, funktioniert....
http://www.nrg.to/RobMexx/Photo-0072.jpg
House of the Death geht auch... aber Spielen und knipsen nicht!
http://www.nrg.to/RobMexx/Photo-0074.jpg
So, das wars mal wieder.
Unten im Anhang nochmal die Bilder.
Für diejenigen bei denen sie nicht angezeigt werden.
Robbie