Liste der Anhänge anzeigen (Anzahl: 1)
Hantarex MTC9110 Bild rollt bei J-Pac Signal
Hallo zusammen! :)
Ich bin gerade dabei meinen Jumbo Quadro mit GroovyMAME (über CRT Emudriver 2.0) einzurichten. Der CRT bekommt das Signal über einen J-Pac der so eingestellt ist das er nur 15KHz durchlässt.
Leider rollt bei dem Signal vom PC das Bild sowohl vertikal als auch horizontal und erzeugt Merhfachbilder. Je kleiner ich das Bild mache umso langsamer rollt es, manchmal bleibt es auch für ne halbe Sekunde stehen, rollt dann aber wieder weiter. V- und H-Hold sind extrem empfindlich.
Mit Arcade-PCBs funzt alles perfekt, aber wenn der J-Pac dranhängt rollt es immer....
Weis jemand woran das liegen könnte? Gibt es am 9110 noch andere Einstellungen (ausser der normalen Bildeinstellplatine) mit denen ich das in den Griff bekomme?
Ich hab mal ein Foto davon angehängt wie das Bild aussieht während es rollt. Hier hab ich das Bild sehr klein eingestellt, dann rollt es viel langsamer als in der "richtigen" Grösse.
Bin für jeden Input bz. einen Schubs in die richtige Richtung dankbar, momentan stecke ich in einer Sackgasse fest und weis überhaupt nicht weiter.
Anhang 14290
Liste der Anhänge anzeigen (Anzahl: 2)
:cool: Danke mal wieder!
Hab die Platine rausgeholt und abwechselnd mit Kontaktreiniger (keine Sorge, kein Kontaktspray ;) ) und Patinenspülung "befüllt" und dann jeweils ne gefühlte Million mal von Anschlag zu Anschlage gedreht, tagelang trocknen lassen, und jetzt geht's. Super.
Nu hab ich ja immer noch diese Störstreifen im Bild. Die sind zwar nach ner Stunde Laufzeit zwischenzeitlich auch mal weg, kommen dann aber immer wenn auch nur kurzzeitig mal wieder.
Bin vor langer Zeit schon alle Erdungsleitungen durchgegangen, aber ohne Erfolg. Dann hab ich gestern was ganz anderes an der Kiste gemacht und sehe zufällig das da eine Erdleitung (Gelb-Grün) mit Flachsteckhülse lose rumhängt (erstes Bild). Hab dann mal gegoogelt und das zweite Bild gefunden, bei dem ist die Erde verbunden!?
Im Hantarex Manual find ich dazu nix, auch ist kein Anschluss dafür vorgesehen. Kann das vielleicht trotzdem die Fehlerquelle (immer mal wiederkehrende horizontale weisse Störstreifen) sein?
Muss das jetzt da dran? Und wenn ja, hab ich dann die ganze Zeit einen saugefährlichen weil nicht geerdeten Monitor betrieben??
Anhang 14331 Anhang 14332