Moin,Moin :)
Ich habe das Spiel Bucky o Hare aber keinen Ton!Im Servicemenü Lautstärke hochgestellt trozdem kein Ton!Mein Automat Quadro Jumbo!
Weiss jemand Rat!Andere PCBs laufen einwandfrei!:confused:
Druckbare Version
Moin,Moin :)
Ich habe das Spiel Bucky o Hare aber keinen Ton!Im Servicemenü Lautstärke hochgestellt trozdem kein Ton!Mein Automat Quadro Jumbo!
Weiss jemand Rat!Andere PCBs laufen einwandfrei!:confused:
.... eine kleine Einleitung zur Person kommt immer ganz gut und ist ausdrücklich erwünscht :-)
Der Mono Ausgang geht ja ganz normal auf den Jamma Connector, wie Du sicherlich schon überprüft hast ... die Stereo Ausgänge sind wohl ein separater Stecker.
Für Ton brauchts ansonsten nur die +12V, wenn der Rest läuft.
Evtl. mal einen Lautsprecher an die Stereo Ausgänge hängen?
Sorry,bin neu hier habe meinen Quadro erst 2 Tage!Die Vorstellung reiche ich noch nach, war so im Gedanken!Asche über mein Haupt!:mad:
Ich bin wie gesagt ein absoluter Neuling!Kannst du mir erklären wo der +12v anliegen muss!:confused:
Möglicherweise muss auch DIP Switch 1 auf OFF stehen wenn der Ton über Jamma läuft (Monoeinstellung).
Danke für eure Tipps!Ich habe einen Lautsprecher angeschlossen am Stereostecker Dip auf ON....Nichts!Dip auf Off wieder nichts auf Jamma ausser brummen
krachsen usw.!:evil:
Spiel läuft sonst ohne Störungen!
Weiss jemand noch Rat!:confused:
Amp kaputt?
Moin,
Kann man sowas reparieren?:confused:
hallo super mario,
bei den konamis ist der soundhybrid die schwachstelle.
kann man alles reparieren, ist nur eine frage des auffwandes und dürfte sich i.d.r. nicht lohnen, wenn man es nicht selbst macht.
:mad:Na supi!Kann man denn sowas irgendwo noch kaufen?:confused:
es ist ja nicht sicher, das es der hybrid ist.
ohne weitere analysen stochern wir hier eh nur im nebel rum.
ab damit zu nem profi oder das ding beerdigen, anders wirds nix. glaub mir.
wenn du das game (also nur die platine) verkaufen möchtest -> pm to me :)
Hybrid kann ich liefern......15 € + Porto.
wie viele hast du? auch die anderen typen?
habe 17 boards mit hybirdsäureschäden ;(
17 Stück habe ich sicher nicht mehr da...vermutlich nochzwei oder drei aus früheren "Restbeständen". Diese Dickschicht-Hybride kann man (sofern nicht gerissen oder gebrochen) in vielen Fällen auch nochmal reparieren. Das ist allerdings schon als "höherer Schwierigkeitsgrad" zu bezeichnen.
hab ich schon gemacht, sogar gebrochene...ist aber an der grenze des (für mich) machbaren. sieht dann auch nicht mehr wirklich gut aus.
wenn deine noch ok sind, würde ich die evtl nehmen. welche typen sind es?
Hat sich mal jemand die Mühe gemacht heraus zu finden, welche Funktionalität in diesen Chips abgebildet wird?
ja............
eigentlich ganz einfach, 12 Volt sind durch das brummen vorhanden. Outut ist also O.K, Input = ???, Pins raussuchen, Spucke nehmen oder besser eine Soundquelle nehmen, Masse und In anschliesen, langt ein CD Player und schauen ob etwas heraus kommt. Ein Kurzschluss oder anderes kann nicht entstehen, da NFSignal. Das mit der Spucke auf dem Zeigefinger ist womöglich Hardcore, aber für mich üblich, fährst du einmal übers IC, nur angefeuchtet, kriegst du die 12 Volt ab oder du hörst eine Tonveränderung. Bedarf jedoch auch Gefühl, was ich über 20 Jahre besitze.
..... Erzähl! .... :D
Auf der Keramik befindet sich ein Konami 054321 (wahrscheinlich ADPCM) , ein AD1888 DAC und das dazugehörige Rekonstruktionsfilter mit 4558 OPA. Die DAC Referenzspannung wird auch auf dem Hybrid erzeugt.Zitat:
welche Funktionalität in diesen Chips abgebildet wird?
Ich habe leider nur noch einen "unberührten" Hybrid gefunden, den ich dem TE "versprochen" habe. Darüberhinaus zwei weitere, auf dem aber der 054321 gewechselt wurde, und deren momentaner Zustand "unklar" ist. Da ich schon lange nichts mehr mit solchen Platinen mache, kann ich den Zustand auch nicht mehr prüfen.
Lange Rede.....Ich habe (ausser dem einen) doch nichts mehr an "Konami 054986A" da....
das problem ist leider:
die elkos laufen aus und verätzen den hybrid und dann die pcb darunter....also obacht.......
ich werde alle hybrids entlacken und die elkos tauschen...schöne fleißarbeit.......
Oh! Danke für die Info! Das ist ja doch mehr drin als ich dachte... Das wurde vermutlich nur aus "Kopierschutzgründen" gemacht?
ich denke mal, die wollten den analogkrams sauber vom rest der pcb trennen und / oder aus platzgründen.