Liste der Anhänge anzeigen (Anzahl: 3)
Revenge from Mars monitor problem
Hello Arcade Professors,
Sorry for doing this in English but my German is not that good :unsure:
I have a problem please help me if you can.
I bought an revenge from Mars pinball with a non working monitor.
I didn't know if it was the pc or the monitor so I hooked it up an other monitor to see what would happen.
I got a picture so I think the pc is oké.
Problem is the picture is not correct. It's like the picture won't get to the middle and the writing is double. Tried to get a good picture by using the monitor adjustment buttons but that won't solve it, believe me I tried :/ .
Picture of the connectors:
Left the original pinball 2000 cable/plug right the "new" tatung monitor cable/plug from a magatouch xl.
Original plug: pin1: orange pin2: beige. Pin3: back and yellow. Pin 4: black pin5,6 empty. Pin7 pink Pin8 black pin9 green. Pin10 brown.
New plug: pin1 yellow. Pin2 white. Pin3 black. Pin4 black. Pin5 blue. Pin6 black. Pin7 white. Pin8 black. Pin9 pink.
I tried to connect the pinball 2000 plug to the new cable and swapped some cables around but nothing seem to work.Maybe it just not working with this monitor but since it looks so close I'm hoping its some kind of sync problem.
Please help me, I tried to look up the answer on the net but that kind of drove me crazy.
Thanks in advance.
Greetings, Arlon Weijer.
The Netherlands.
Liste der Anhänge anzeigen (Anzahl: 4)
Pictures of the Wels Garden
Liste der Anhänge anzeigen (Anzahl: 6)
I looked at the capacitors and some of them have some brown stuf under them.
they are not swollen up maybe the brown stuf is just soldering fluid.
wanna try putting on new capacitors my self but not sure if that's wise.
if I wanna do it myself where do you recommend me buying new capacitors?
is it possible sending you the neck board and the other pcb board so you can check them and repair them if you think that's possible?
is you want to do this can you give me an indication of how much this gonna cost me?
thanks for the info you gave me till now :)
Liste der Anhänge anzeigen (Anzahl: 1)
Hoi,
im gonna sent you the boards.
thank you for wanted to do this.
the problem is my budget for my pinball hobby is very low at the moment:'-(
so please let me know if it's going to cost more than €60,--
really hoping it is something wrong with the boards and not with the tube it self.
on the picture I am pointing on the 7 round things at the neck of the tube they are lose I can move them eazely is this normal do they have to be in sertan positions?
i am confidant that you can fix it if it is something wrong with the boards, please keep me informed about the progress.
pleas sent me your complete address.
thanks again !!
Liste der Anhänge anzeigen (Anzahl: 1)
Someone did put a line on there with a marker.
if I line the marks up it look like in the picture.
say this is all wrong, is it possible to use the tube from the Megatouch xl with the boards of the pinball 2000 ?
Liste der Anhänge anzeigen (Anzahl: 3)
You probably know a thing or 2 about conversion kits.
maybe it is just easier for me to go that route I know I would not get a better picture with a TFT monitor but better not a perfect picture than no picture at all.
i bought a gbs 8200 and build a input withs should work, but than I read on the internet that some of these gbs 8200 things just are not working.
a conversion to a TFT screen in a pinball 2000 is just not a plug and play job.
can you like sell me a converter system that would work in a pinball 2000 machine ?