PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : RGB via SCART



SailorSat
24-09-2007, 09:29
Introduction
If you wish to connect a RGB-SCART unit, let it be a TV, Beamer or for example an old Amiga monitor, you can build a simple cable.



Where to get a cable
If you don't want to build a cable yourself, or you don't have any soldering skills, you can buy prebuilt cables at www.wolfsoft.de (http://www.wolfsoft.de/shop/product_info.php/products_id/12836/
).

Please note! There are many SCART-to-VGA cables available on the net, which have a different Pinout.



Pinout
The most simple pinout would be this one.


VGA SCART NAME
1 ----------- 15 Red Signal
6 ----------- 13 Red Ground

2 ----------- 11 Green Signal
7 ----------- 9 Green Ground

3 ----------- 7 Blue Signal
8 ----------- 5 Blue Ground

9 --100-Ohm-- 16 Blanking = RGB-Select (+5V -> 3V)
5 ----------- 18 Blanking Ground

** ----------- 8 AV-Select -- +5V = 16/9, +12V = 4/3

13 --1000-Ohm- 20 Sync Signal (H-Sync*)
14 --1000-Ohm- 20 Sync Signal (V-Sync*)
10 ----------- 17 Sync Ground

* neg. H-Sync + neg. V-Sync = neg C-Sync



Pictures
http://images.arianchen.de/soft15khz/vga-scart-35mm.png

http://images.arianchen.de/soft15khz/scart-vga-stecker.jpg
http://images.arianchen.de/soft15khz/scart-vga-buchse.jpg
http://images.arianchen.de/soft15khz/scart-vga-total.jpg